PP2000 Level Loader

Automatic levellers are designed to maintain the top of the pallet load at a comfortable working height. This will help to reduce injury associated with loading pallets at the floor level and will also improve the worker productivity.

The PP2000 uses coil springs so does not need an pneumatics or hydraulics. It can be set up to use loads between 200 – 2000kg and doesn’t require any tools to adjust.

– Unique power-free automatic level loader
– Heavy duty springs maintain comfortable working height and integral turntable allows rotation of pallet loads
– Suitable for pallet loads between 200-2000kg
– Overall size 1110W x 1220Lmm
– Maximum height 700mm, lowered height 240mm
– Turntable 1100mm diameter

SLT Low Profile Static Lift Table

Low closed height eliminates need for a pit
– 1000kg Capacity Low Profile Static Lift Table (mains operated)
– The MA-H achieves a low closed height and usually eliminates the need for a pit
– They lift up to around 760mm and also help alleviate bending and twisting often found in industrial environments
– Tables are controlled by a 24V ‘satellite’ hydraulic power pack consisting of up, down and emergency stop buttons
– Tables are powered by AC380V/50Hz/3 Phase Mains
– Pressure relief valve fitted to protect the hydraulic system
– Oil less bushing on axle pivots
– Emergency check valve to ensure slow controlled descent in the event of a hydraulic line failure
– Removable lifting eyes to facilitate easy handling and installation
Tables have fully interlocked descent arrestors should there be an obstruction
– These tables are manufactured to EN1570:1999 and are IP54 protected

SLT-HU Low Lift Table

– “U” Shaped Top Platform
– “U” shaped table are specially made for handling pallets, no need for a pit or load.
– They are manufactured to all European safety standards including EN1570:1999.
– Remote power pack with pedestal and controls,IP54 protection.
– Upper platform fitted with safety perimeter to prevent descent on contact with obstructions.
– 24V control box with UP and DOWN buttons and emergency stop.
– External power pack equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed.
– Hose burst safety valve to stop the lift table lowering in case of hose breakage.
– Removable lifting eyes to facilitate handling and installation of the lift table.
– Oil-less bushings on pivot points.

SLT-H Static Lift Table

Alleviates bending and twisting

– Model SLT-H Static Lift Table (mains operated), capacities 1000kg + 2000kg
– The SLT-H can be used either at ground level or in a pit
Electric lifting alleviates bending and twisting often found in industrial environments
– Powered by AC380v/50Hz/3 Phase Mains
– Pressure relief valve fitted to protect the hydraulic system
– Oilite brushes on axle pivots
– Emergency check valve to ensure slow controlled descent in the event of a hydraulic line failure
– Removable lifting eyes to facilitate easy handling and installation
– Tables have fully interlocked descent arrestors should there be an obstruction
– These tables are manufactured to EN1570:1999 and are IP54 protected
– 18 models to suit your application available on request

BG-S Scissor Lift Table

– The Kentruck BG-S Scissor Lift Table are lifted by pump action foot pedal & lowered by hand operated release trigger
– Comply to EN1570:1998
– Mobile on 2 fixed & 2 swivel braked castors with wheel guards
– Handles supplied loose
– Repair & maintenance available – please call for details